| SHIPPING, HANDLING AND STORAGE |
AQUAMET® Metal Removal Products
STORAGE AND HANDLING
AQUAMET® products are available in 55 gallon plastic drums or totes.
AQUAMET® products may cause eye and skin irritation. Do not get in eyes, on skin or on clothing. Wear goggles or face shield, rubber gloves and protective clothing (long sleeve shirt, long pants and boots) when handling AQUAMET® products. Harmful if swallowed. Avoid contamination of food or feed.
STATEMENT OF PRACTICAL TREATMENT (First Aid)
In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. For eye contact, call physician. Remove and wash contaminated clothing before reuse.
If swallowed, drink promptly a large quantity of milk, egg whites or gelatin solution; or, if these are not available, drink large quantities of water. Call a physician immediately
CONTAINER DISPOSAL
Plastic Containers: Triple rinse (or equivalent). Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or by incineration: or, if allowed by state and local authorities, by burning. If burned, stay out of smoke.
SHIPPING
AQUAMET® products should be stored in 304 stainless steel or better, fiberglass or plastic. Certain phenolic linings are acceptable for bulk storage. Mild steel, copper, brass and aluminum should not be used.
The above materials of construction also apply to all pipes, valves and pumps used in the application or transport of AQUAMET products.
NSIGHT® Natural Clarification Polymers
SHIPPING AND HANDLING
NSIGHT® Products are available in bulk and totes. Dry products are typically available in 50 pound bags
STORAGE
NSIGHT Polymers should be stored in 304 stainless steel or better, fiberglass or plastic tanks. Certain phenolic linings are acceptable for use in drums and storage tanks. Mild steel, copper, brass and aluminum should not be used.
The above materials of construction also apply to all pipes, valves and pumps used in the application or transport of NSIGHT Polymers.
ALCOCLEAR™ and FLOC-AID Polymers
SHIPPING AND HANDLING
ALCOCLEAR and FLOC-AID® Products are available in bulk, totes and 55-gallon drums. The standard drum is plastic. Dry products are typically available in 50 pound bags.
STORAGE
ALCOCLEAR and FLOC-AID® Polymers should be stored in 304 stainless steel or better, fiberglass or plastic tanks. Certain phenolic linings are acceptable for use in drums and storage tanks. Mild steel, copper, brass and aluminum should not be used.
The above materials of construction also apply to all pipes, valves and pumps used in the application or transport of ALCOCLEAR and FLOC-AID® Polymers.